View SPS-4110WG_4128691.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Optoway
SPS-4110WG
FEATURES DESCRIPTION
SPS-4110WG
1
***********************************************************************************************************************************************************************
(RoHS Compliant)
3.3V / 1310 nm / 8.5 Gbps Digital Diagnostic LC SFP+ SINGLE-MODE TRANSCEIVER
***********************************************************************************************************************************************************************
l l l l l l l l l l l l
Up to 8.5 Gbps Bi-directional Data Links Complaint with SFP+ MSA Compliance with Fibre Channel FC-PI-4 800-SM-LC-L Compliant with 4G and 2G Fibre Channel SFF-8472 Digital Diagnostic Function 1310 nm DFB LD Transmitter AC/AC Coupling according to MSA 2 to 10,000 m at 8.5 Gbps Single +3.3 V Power Supply RoHS 6/6 Compliant 0 to 70oC Operating Class 1 Laser International Safety Standard IEC-60825 Compliant
The SPS-4110WG series single mode transceiver is small form factor pluggable module for bi-directional serial optical data communications such as 8x/4x/2x Fibre Channel. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a 1310 nm multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
APPLICATIONS
l Multi-rate 8x / 4x / 2x Fibre Channel
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.
Distance (km) 10 Wavelength (nm) 1310 DFB Package SFP+ with DMI Temp. (oC) 0 to 70 RoHS Compliant Yes
ORDER INFORMATION
P/No. Bit Rate (Gb/s) 8/4/2 FC-PI
FC-PI-4
SPS-4110WG
Absolute Maximum Ratings
Parameter Storage Temperature Operating Case Temperature Power Supply Voltage Symbol Tstg Topr Vcc Min -40 0 -0.5 Max 85 70 3.6 Units o C o C V Notes
Recommended Operating Conditions
Parameter Power Supply Voltage Operating Case Temperature Power Supply Current Data Rate Symbol Vcc Topr ICC (TX+RX) 1 Min 3.13 0 Typ 3.3 260 8.5 Max 3.47 70 300 Units / Notes V o C mA Gb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2007 V1.0
Optoway
Transmitter Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V)
Parameter Average Launch Power Optical Modulation Amplitude Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Relative Intensity Noise Average Launch Power of OFF Transmitter Symbol Po, Avg Po, OMA c SMSR RIN Min -8 0.29 1260 30 -128 -30 Typ Max 0 1360 1 Units dBm mW nm nm dB dB/Hz dBm 1310
SPS-4110WG
Notes 1
2
***********************************************************************************************************************************************************************
-20 dB width
1. Output power is power coupled into a 9/125 m single-mode fiber.
Receiver Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V)
Parameter Unstressed Sensitivity at 8.5 Gb/s Stress Sensitivity at 8.5 Gb/s Receiver Overload LOS -- Deasserted LOS -- Asserted Wavelength of Operation Optical Return Loss Symbol Sens Sens P MAX LOSD LOSA c ORL Min Typ Max 0.042 -15 0.066 -15 --1565 -12 Units mWp-p dBm mWp-p dBm dBm dBm nm dB Notes 2, OMA 3, Average Power 2, OMA Transition: low to high Transition: high to low
0.5 ---25 1260
---------
2. Measured with worst ER; BER < 10-12 and PRBS 2 7-1. 3. Represents sensitivity based on OMA spec, as corrected to incoming Extinction Ratio of 7 dB. For example, an OMA of 0.042 mW is approximately equal to an average power of -15 dBm, average with an Extinction ratio of 7 dB.
Electrical Characteristics
Parameter Symbol High-Speed Signal (CML) Interface Specification Input Data Rate Differential Input Impedance Rin Differential Data Input Amplitude Output Data Rate Differential Output Impedance Rout Differential Data Output Amplitude Low-Speed Signal (LVTTL) Interface Specification Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Min 1 300 1 350 Typ 8.5 100 1200 8.5 100 600 Max Units Gb/s mVpp Gb/s mVpp Notes
Internally AC coupled
700
Internally AC coupled
2.0 GND 2.4 GND
Vcc+0.3 0.8 Vcc 0.5
V V V V
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2007 V1.0
Optoway
CONNECTION DIAGRAM
SPS-4110WG
3
***********************************************************************************************************************************************************************
PIN Signal Name
1 2 VEET TX_Fault
Description
Transmitter Signal Ground Transmitter Fault Indication. Logic "1" Output = Laser Fault. Logic "0" Output = Normal Operation Logic "1" Input (or no connection) = Laser off, Logic "0" = Laser on. Modulation Definition 2 - Two wires serial ID Interface Modulation Definition 1 - Two wires serial ID Interface Modulation Definition 0 - Ground in Module RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Loss of Signal Out (OC). TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Receiver Signal Ground
PIN Signal Name
11 12 VEER RD-
Description
Receiver Signal Ground Inverse Receiver Data Out
3 4 5 6 7
TX_Disable SDA SDL MOD-ABS RS0
13 14 15 16 17
RD+ VEER VCCR VCCT VEET
Receiver Data Out Receiver Signal Ground Receiver Power - 3.3V5% Transmitter Power - 3.3V5% Transmitter Signal Ground
8 9
RX_LOS RS1
18 19
TD+ TD-
Transmitter Data In Inverse Transmitter Data In
10
VEER
20
VEET
Transmitter Signal Ground
Module Definition
Module Definition 4 PIN 4 SDA PIN 5 SCL PIN 6 MOD-ABS Interpretation by Host Serial module definition protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2007 V1.0
Optoway
RECOMMENDED CIRCUIT SCHEMATIC
Vee T Tx_DISABLE Tx_FAULT ( 1,17,20) 3 2 10 K TD + 18 Z=50 TD 19 Z=50 Vcc T 16 0.1F 4 .7 H Vcc 3.3V 22 F 0.1F 0.1F Vcc R 15 0.1F 22 F 4 .7 H TD TD +
SPS-4110WG
4
***********************************************************************************************************************************************************************
Tx_DISABLE Tx_FAULT
LD D river
100
SerDes IC
Protocol IC
RD -
12 Z=50 100
RD -
POST Amp
RD +
13 Z=50 10 K
RD +
depending on SE D S RE
LOSS OF SINGAL
LOS Vee R RS1 30K 30K MOD_ABS RS0
8 ( 10,11,14) 9 7 TX Rate Select RX Rate Select
6 5 4 10 K 10 K 10 K Vcc 3.3V
MODU LE DETECT SCL SDA
EEPROM
SCL SDA
SFP+ module
PACKAGE DIAGRAM
Units in mm
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2007 V1.0
Optoway
EEPROM Series ID Memory Contents (Address A0h)
Addr. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Hex ASCII Note 03 SFP 04 07 LC 00 00 00 00 10 Long Distance(L) 10 LL 01 Single Mode (SM) 54 8/4/2 GBd 01 8B/10B 55 8.5Gbps 00 0A 10km 64 10km 00 00 00 00 Vendor name 4F O 50 P 54 T 4F O 57 W 41 A 59 Y 20 20 20 20 20 Addr. 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 Hex ASCII Note 20 20 20 20 00 NA 00 Vendor IEEE OUI 0E FA 53 S Part Number 50 P 4D S 2D 34 4 31 1 31 1 30 0 57 W 47 G 20 20 20 20 20 20 30 0 Revision, 30 0 depended on version 30 0 30 0 1310 nm 05 1E 00 Reserved
Checksum 0-62
SPS-4110WG
Addr. 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 Hex ASCII Note Addr. 00 Txdis, Txfault, 96 LOS enable 97 1A 00 Up bit rate 98 00 Low bit rate 99 Serial number: 100 each piece 101 with different 102 serial number 103 104 105 106 107 108 109 110 111 112 113 114 115 Date Code 116 117 118 119 120 121 122 123 68 Monitoring 124 F0 Soft Control 125 03 SFF-8472V10 126 Checksum 64-94 127 Hex ASCII Note 00 Vendor specific 00 EEPROM 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5
***********************************************************************************************************************************************************************
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2007 V1.0
Optoway
EEPROM Series ID Memory Contents (Address A2h)
Addr. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
SPS-4110WG
6
***********************************************************************************************************************************************************************
Hex Note Addr. Hex Note Addr. Hex Note Addr. Hex Note 55 Temp. High 32 37 Rx Power High 64 00 For External Cal. 96 Real Time Temp. MSB Alarm (85oC) 33 2D Alarm (1413W) 65 00 For External Cal. 97 Real Time Temp. LSB 00 FB Temp. Low 34 01 Rx Power Low 66 00 For External Cal. 98 Real Time Vcc MSB Alarm(-5oC) Alarm (27W) 00 35 09 67 00 For External Cal. 99 Real Time Vcc LSB Real Time Tx Bias MSB 50 Temp. High 36 2B Rx Power High 68 00 For External Cal. 100 Warming(80 oC) Real Time Tx Bias LSB 00 37 D4 Warming (1122W) 69 00 For External Cal. 101 Real Time Tx Pwr MSB 00 Temp. Low 38 01 Rx Power Low 70 00 For External Cal. 102 Warming (0 oC) Real Time Tx Pwr LSB 00 39 A4 Warming(42W) 71 00 For External Cal. 103 8C Voltage High 40 00 Reserved 72 00 For External Cal. 104 Real Time Rx Pwr MSB Alarm (3.6V) Real Time Rx Pwr LSB A0 41 00 Reserved 73 00 For External Cal. 105 75 Voltage Low 42 00 Reserved 74 00 For External Cal. 106 Reserved Alarm(3.0V) 30 43 00 Reserved 75 00 For External Cal. 107 Reserved 88 Voltage High 44 00 Reserved 76 00 For External Cal. 108 Reserved Warming(3.5V) B8 45 00 Reserved 77 00 For External Cal. 109 Reserved Tx Dis, Tx Fault, Rx Los 79 voltage Low 46 00 Reserved 78 00 For External Cal. 110 Warming (3.1V) 18 Reserved 79 00 For External Cal. 111 Reserved 47 00 AF Tx Bias High 48 00 Reserved 80 00 For External Cal. 112 Alarm Flag Alarm(90mA) C8 49 00 Reserved 81 00 For External Cal. 113 Alarm Flag/Reserved 03 Tx BiasLow 50 00 Reserved 82 00 For External Cal. 114 Reserved Alarm(2mA) E8 51 00 Reserved 83 00 For External Cal. 115 Reserved 9C 52 00 Reserved 84 00 For External Cal. 116 Warming Flag Tx Bias High Warming(80mA) 53 00 40 Reserved 85 00 For External Cal. 117 Warming Flag/Reserved 07 54 00 Reserved 86 00 For External Cal. 118 Reserved Tx Bias Low Warming(4mA) D0 55 00 Reserved 87 00 For External Cal. 119 Reserved Vendor Specific 31 Tx Power High 56 00 For External Cal. 88 00 For External Cal. 120 2D Alarm (1259W)) 57 00 For External Cal. 89 00 For External Cal. 121 04 Tx Power Low 58 00 For External Cal. 90 00 For External Cal. 122 Alarm(126W) EB 59 00 For External Cal. 91 00 For External Cal. 123 27 Tx Power High 60 00 For External Cal. 92 00 For External Cal. 124 10 Warming(1000W) 61 00 For External Cal. 93 00 For External Cal. 125 06 Tx Power Low 62 00 For External Cal. 94 00 For External Cal. 126 31 Warming (159W) 63 00 For External Cal. 95 Check Sum 127 Note: Address 128 - 247: customer R/W eeprom. Address 248 - 255: Vendor Specific. Note: Specifications subject to change without notice.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
7/1/2007 V1.0

▲Up To Search▲

Price & Availability of SPS-4110WG

	To Download SPS-4110WG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .